• The best balancing ionizer available
• Offset voltage balance controlled to ±3 Volts ..typical tested per ANSI/ESD S3.1 and ESD TR53
• Fast discharge times and offset voltage ..well below
< +/- 50 volt required limit of ANSI/ESD S20.20
• Features steady state DC ionization and ..EMIT's
patented (US Patent #4,974,115) Sense Feedback ..balancing
• Sealed "Thru-Tunnel" air flow design
• Communication via RS485 compatible data output ..with a host computer
• CSA certified
• Low Ozone Emissions – tests well below the OSHA ..limit of 0.05 ppm ozone
• RS485 Data Output Port – consult factory for ..further information
• 5-year limited warranty
• Made in America
“Necessary non-conductors in the environment cannot lose their electrostatic charge by attachment to ground. Ionization systems provide neutralization of charges on these necessary non-conductive items (circuit board materials and some device packages are examples of necessary non-conductors). Assessment of the ESD hazard created by electrostatic charges on the necessary nonconductors in the work place is required to ensure that appropriate actions are implemented, commensurate with risk to ESDS [ESD sensitive] items”. (ANSI/ESDS20.20-2007 Foreword)
If you would rather not receive these emails from EMIT,
please Click Here
If you are having trouble with the unsubscribe feature, e-mail SmartESD@StaticExperts.com
